مجله اینترنتی دیتاسرا
امروز جمعه ۱۰ فروردین ۱۴۰۳

نمونه مشخصات فنی پروژه (SPEC): مشخصات عمومی ساختمان BUILDING GENERAL SPECIFICATION

مشخصات فنی پروژه های بزرگ می بایست بر اساس خواست کارفرما و منطبق با مدارک SPEC (Specification) باشند. در این مدارک که در ابتدای پروژه تدوین می شوند به تمامی مشخصات پروژه از جنبه های مختلف اشاره شده و پیمانکاران می بایست بر اساس آنها پروژه را اجرا نمایند. تمامی مسائل و الزامات طراحی، جزئیات اجرایی، مشخصات فنی تجهیزاتی که می بایست توسط پیمانکاران تأمین شوند... تماماً در SPEC های مختلف ذکر شده و مبنای اجرای پروژه خواهند بود.

فایلی که توسط دیتاسرا ارائه شده نمونه ای از SPEC های مورد استفاده در یکی از پروژه های بزرگ می باشد که امیدواریم مورد توجه مهندسان، مجریان و علاقمندان گرامی قرار گیرد.


محتوای فایل به زبان انگلیسی می باشد.



No. of pages: 8

Part of SPEC:


SCOPE OF WORK

CONTRACTOR shall be responsible for the Engineering, Procurement and Construction of the buildings listed in chapter 11 BUILDING LIST of the Building Functional Specification ....

All buildings shall be located on the main site (see OVERALL PLOT PLAN ...). Non Industrial buildings shall be located in the north west area of the site with, with the exception of the Operator Buildings and Sub Stations. The Control, Laboratory and Telecoms buildings shall be located in the north west area of the site but within the Process area.

Engineering

Engineering shall include the detailed design (specifications, calculations, drawings and bill of quantities) based on the FEED documentation referred to in this specification.

Procurement

CONTRACTOR shall be responsible for the purchasing of all materials required by detailed design, included in the scope of work and delivered to site.

Before ordering materials, CONTRACTOR shall submit Vendor list and material data sheets/brochures to COMPANY for approval.

Construction

CONTRACTOR shall be responsible for all construction on site.

It is to be considered that the CONTRACTOR shall operate in conjunction with other Sub Contractors under the co-ordination of COMPANY or their representative.

Civil

CONTRACTOR shall commence the construction on a pre graded and compacted site.

CONTRACTOR, at his own expenses, shall prepare a Geotechnical Report, indicating allowable soil bearing capacities and settlements, based on the existing Onshore Soil Investigation report. However he shall be responsible for additional soil investigation at his own expenses on which the geotechnical report and structural design shall be based:

Civil activities will include:    - Structural

Architectural

HVAC

Under ground services

Furniture

All cabling into buildings shall be via multi cable transit blocks (MCT’s) flush with the external wall face.  MCTs to be a proprietary system that ensures a complete seal after installation of cables.  

Plumbing System

It shall consist of:    - Hydrosanitary systems in manned buildings.

Service water supply and draining for HVAC systems in each building.

Grease interceptors for kitchen wastes shall be provided.

The Works shall be evaluated on the basis of architectural drawing information.

HVAC

HVAC to buildings shall be as defined in the HVAC Specifications. The layouts as indicated on the Architects drawings and HVAC Plant Room Studies are indicative and final special requirements shall be established at Detail Design.

Refer to HVAC Specifications above :

The buildings shall be air conditioned, ventilated and/or pressurised.

Potable Water shall be from a central supply.

Chilled water from local air cooled chillers

Specifications:

As noted above

Drawings:

As noted above

Electrical System

It shall include: power and convenience socket system, lighting system, earthing and lightning system.

Electrical supply to the buildings shall be as defined in the Electrical Specifications.  The layouts as indicated on the Architects drawings are indicative and final special requirements shall be established at Detail Design.


مشخصات

مشخصات

تاریخ درج: ۱۳۹۷/۵/۱ منبع: دیتاسرا

خرید آنلاین

خرید آنلاین

عنوان: BUILDING GENERAL SPECIFICATION حجم: 20.11 کیلوبایت قیمت: 89500 تومان رمز فایل (در صورت نیاز): www.datasara.com نرم افزارهای مورد نیاز: winrar - adobe acrobat - office

در صورتی که به هر دلیل از خرید خود رضایت نداشتید
تنها با ارسال یک ایمیل وجه خود را دریافت نمایید
نمای مطلب

دامنه کار

قراردادی باید مسئول مهندسی، تدارکات و ساخت و ساز ساختمان های ذکر شده در فصل 11 ساخت لیست از مشخصات ساختمان کاربردی ... باشد.

تمام ساختمان ها باید بر روی سایت اصلی قرار داشته باشند (قسمت عمومی PLACE ... را ببینید ). ساختمان های غیر صنعتی باید در قسمت شمال غرب این سایت با، به جز ساختمان های اپراتور و ایستگاه های زیر، واقع شود. ساختمان های کنترل، آزمایشگاه و مخابرات باید در ناحیه شمال غرب سایت قرار بگیرد اما در منطقه فرآیند.

مهندسی

مهندسی باید شامل طراحی دقیق (مشخصات، محاسبات، نقشه ها و لایحه) براساس اسناد FEED اشاره شده در این مشخصات باشد.

تدارکات

پیمانکار باید برای خرید تمام مواد مورد نیاز طراحی دقیق، شامل محدوده کاری و تحویل به سایت مسئول باشد.

قبل از سفارش مواد، پیمانکار باید لیست فروشندگان و ورق های داده های مواد / بروشور را برای تصویب شرکت ارسال نماید.

ساخت و ساز

پیمانکار مسئول تمام ساخت و سازها در سایت می باشد.

در نظر گرفته شده است که پیمانکار باید در ارتباط با سایر زیر قراردادی تحت هماهنگی شرکت یا نماینده آن عمل کند.

مدنی

پیمانکار باید ساخت و ساز را در یک سایت پیش ساز و فشرده آغاز کند.

پیمانکار، در هزینه های خود، یک گزارش ژئوتکنیک را، که براساس گزارش موجود تحقیقات زمین شناسی موجود، نشان می دهد، نشان می دهد ظرفیت های دفع خاکی و سکونتگاه های مجاز، را آماده می کند. با این حال او باید مسئولیت بررسی خاک های اضافی را در هزینه های خود داشته باشد که در آن گزارش ژئوتکنیک و طراحی ساختاری باید بر اساس:

فعالیت های مدنی شامل:               - ساختاری

معماری

تهویه مطبوع

تحت خدمات زمینی

مبلمان

تمام کابینت ها در ساختمان ها باید از طریق بلوک های چندتایی کابلی (MCT) با چهره دیوار خارجی فشرده شوند. MCTs یک سیستم اختصاصی است که پس از نصب کابل، مهر و موم کامل را تضمین می کند.

سیستم لوله کشی

این شامل:               - سیستم های Hydrosanit ary در ساختمان های مجهز.

سیستم آب رسانی خدمات و تخلیه سیستم های HVAC در هر ساختمان.

ردیاب های گریس برای زباله های آشپزخانه باید ارائه شوند.

آثار باید براساس اطلاعات نقاشی معماری ارزیابی شود.

تهویه مطبوع

سیستم های تهویه مطبوع ساختمان ها باید همانطور که در مشخصات سیستم های تهویه مطبوع تعریف می شود. طرح بندی هایی که در نقشه های معماران و مطالعات اتاق کارخانه های تهویه مطبوع نشان داده شده است، الزامات ویژه ای هستند و نیازهای ویژه نهایی باید در طراحی دقیق ایجاد شود.

به بالا مشخصات فنی HVAC مراجعه کنید:

ساختمان ها باید تهویه مطبوع، تهویه و / یا فشار قرار گیرند.

آب قابل حمل باید از منبع مرکزی باشد.

آب سرد از چیلرهای هوا خنک محلی

مشخصات :

همانطور که در بالا اشاره شد

نقشه ها:

همانطور که در بالا اشاره شد

سیستم الکتریکی

این باید شامل: سیستم سوکت قدرت و راحتی، سیستم نورپردازی، سیستم زمینی و رعد و برق باشد.

تامین برق به ساختمان ها باید در مشخصات برق تعریف شود. طرح بندی هایی که در نقشه های معماری نشان داده شده اند، الزام آور هستند و الزامات ویژه ویژه باید در طراحی دقیق ایجاد شود.

مشخصات همانطور که در بالا ذکر شد.

سیستم تشخیص آتش

سیستم آتش نشانی باید شامل موارد زیر باشد:

تامین تجهیزات برای سیستم حفاظت از آتش و گاز (یعنی آشکارسازها، پانل ها، کابل ها، جعبه های اتصال، غدد کابل، تجهیزات تست و غیره)

نصب و راه اندازی، در داخل و خارج از ساختمان، سیستم های حفاظت از آتش و گاز

آشکارسازهای آتش، گاز، لامپ، آژیر و سیستم های کنترل پانل توسط پیمانکار ارائه می شود.

آثار باید بر اساس نقشه های معماری و مشخصات زیر مورد ارزیابی قرار گیرد:

مشخصات تشخیص آتش و گاز همانطور که در بالا ذکر شد.

سیستم های مخابراتی

کارهای عمرانی در تمام ساختمان ها برای سیستم های مخابراتی زیر پیش بینی شده است:

سیستم تلفن PABX

سیستم خط تلفن داغ

سیستم زنگ خطر عمومی

سیستم کنترل دسترسی

شبکه محلی

فعالیت های زیر باید به عنوان بخشی از کارهای عمرانی داخل ساختمان ها برای سیستم های ذکر شده در بالا ذکر شود:

طراحی برای ساخت شبکه های توزیع داخلی براساس توزیع اولیه تجهیزات توسط دیگران

تامین شبکه های توزیع داخلی، از جمله کابل ها، مسکن ها، کانال ها، سوکت ها، جعبه های ترمینال برای کابل های خارجی، ورودی های کابل.

نصب در داخل ساختمان های شبکه توزیع بالا ذکر شده است.

آزمایشات بصری و الکتریکی از شبکه های ارائه شده تا حد امکان

تامین و نصب تجهیزات اصلی مربوط به هر سیستم توسط دیگران ارائه خواهد شد.

مشخصات و فهرست تجهیزات تمام سیستم مخابراتی اعمال شده به پروژه در مشخصات زیر ذکر شده است:

سیستم مخابراتی مشخصات همانطور که در بالا ذکر شد

سیستم آتش نشانی

سیستم آتش سوزی باید شامل یک سیستم سیلاب سیستم پاک کننده ثابت (C O 2) با فعال سازی دستی باشد که برای حفاظت از کف کاذب اتاق های فنی و اتاق کنترل مرکزی ارائه می شود.

تعداد قابل توجهی از آتش خاموش کننده ها باید در هر ساختمان ارائه شود.

آثار باید بر اساس حجم واقعی در کف کاذب و در سقف های کاذب محافظت شوند، به عنوان ابعاد نشان داده شده در نقشه های معماری و با توجه به مشخصات زیر:

ویژگی های آتش سوزی فعال به عنوان ذکر شده



SCOPE OF WORK

CONTRACTOR shall be responsible for the Engineering, Procurement and Construction of the buildings listed in chapter 11 BUILDING LIST of the Building Functional Specification ....

All buildings shall be located on the main site (see OVERALL PLOT PLAN ...). Non Industrial buildings shall be located in the north west area of the site with, with the exception of the Operator Buildings and Sub Stations. The Control, Laboratory and Telecoms buildings shall be located in the north west area of the site but within the Process area.

Engineering

Engineering shall include the detailed design (specifications, calculations, drawings and bill of quantities) based on the FEED documentation referred to in this specification.

Procurement

CONTRACTOR shall be responsible for the purchasing of all materials required by detailed design, included in the scope of work and delivered to site.

Before ordering materials, CONTRACTOR shall submit Vendor list and material data sheets/brochures to COMPANY for approval.

Construction

CONTRACTOR shall be responsible for all construction on site.

It is to be considered that the CONTRACTOR shall operate in conjunction with other Sub Contractors under the co-ordination of COMPANY or their representative.

Civil

CONTRACTOR shall commence the construction on a pre graded and compacted site.

CONTRACTOR, at his own expenses, shall prepare a Geotechnical Report, indicating allowable soil bearing capacities and settlements, based on the existing Onshore Soil Investigation report. However he shall be responsible for additional soil investigation at his own expenses on which the geotechnical report and structural design shall be based:

Civil activities will include:    - Structural

Architectural

HVAC

Under ground services

Furniture

All cabling into buildings shall be via multi cable transit blocks (MCT’s) flush with the external wall face.  MCTs to be a proprietary system that ensures a complete seal after installation of cables.  

Plumbing System

It shall consist of:    - Hydrosanitary systems in manned buildings.

Service water supply and draining for HVAC systems in each building.

Grease interceptors for kitchen wastes shall be provided.

The Works shall be evaluated on the basis of architectural drawing information.

HVAC

HVAC to buildings shall be as defined in the HVAC Specifications. The layouts as indicated on the Architects drawings and HVAC Plant Room Studies are indicative and final special requirements shall be established at Detail Design.

Refer to HVAC Specifications above :

The buildings shall be air conditioned, ventilated and/or pressurised.

Potable Water shall be from a central supply.

Chilled water from local air cooled chillers

Specifications:

As noted above

Drawings:

As noted above

Electrical System

It shall include: power and convenience socket system, lighting system, earthing and lightning system.

Electrical supply to the buildings shall be as defined in the Electrical Specifications.  The layouts as indicated on the Architects drawings are indicative and final special requirements shall be established at Detail Design.

Specification as noted above.

Fire Detection System

Fire detection system shall consist of:

Supply of the equipment for fire & gas protection system (i.e. detectors, panels, cables, junction boxes, cable glands, test equipment, etc.)

Installation, inside and outside the buildings, of fire & gas protection systems

Fire & gas detectors, lamps, sirens and control panel systems will be provided by CONTRACTOR.

Works shall be evaluated and performed according to the architectural drawings and the following specification:

Fire and gas detection Specifications as noted above.

Telecommunication Systems

Civil works will be foreseen inside all buildings for the following telecommunication systems:

PABX telephone system

Hot line telephone system

General alarm system

Access control system

Local area network

The following activities shall be considered as part of the civil works inside the buildings for the systems listed above:

Design for construction of the indoor distribution networks, based on basic equipment distribution provided by others

Supply of the indoor distribution networks, including cables, raceways, conduits, sockets, terminal boxes for outside cables, cables entries.

Installation inside the buildings of the distribution networks above listed.

Visual and electrical tests of the provided networks, as far as applicable

Supply and installation of the main equipment relevant to each system will be provided by others.

Characteristics and equipment list of all telecommunication system applied to the Project are included in the following specification:

Telecommunication system Specifications as noted above

Fire Fighting System

The fire fighting system shall consist of a fixed clean agent flooding system (CO2) with manual activation, to be provided to protect the false floor of instrument technical rooms and central control room.

Adequate number of fire extinguishers shall be provided in each building.

The works shall be evaluated and performed on the actual volume under the false floor and in false ceilings to be protected, as dimensions indicated on the architectural drawings, and according to the following specification:

Active fire fighting Specifications as noted above.


فایل اکسل طراحی شمع های درجاریز بتنی و محاسبه طول مورد نیاز
فايل پيوست

  فایل پیش رو اکسل طراحی شمع های درجاریز بتنی بوده که با بررسی ظرفیت باربری طول مورد نیاز آنها را محاسبه مینماید. امیدواریم دانش، تجربه و انرژی بکار گرفته شده در تهیه این مجموعه ارزشمند مورد توجه و استفاده مهندسان و علاقه مندان عزیز قرار گیرد.   ... [ ادامه مطلب ]

فایل اکسل طراحی مخزن فلزی هوایی بر اساس آیین نامه AISC با در نظر گرفتن نیروی باد و زلرله
فايل پيوست

 فایل پیش رو اکسل طراحی مخزن فلزی هوایی می باشد که بر اساس آیین نامه AISC و با در نظر گرفتن نیروی باد و زلرله محاسبات را انجام داده و ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 79500 تومان
 مشخصات کلی: 

گروه: اکسل طراحی

فایل اکسل طراحی براکت فلزی بر اساس آیین نامه AISC-ASD 9th, Appendix F
فايل پيوست

 براکت های فلزی عناصر کنسولی هستند که در ستون ها جهت ایجاد اتصال تیرها پیش بینی می شوند. فایل پیش رو اکسل طراحی براکت فلزی می باشد که بر اساس آیین ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 79500 تومان
 مشخصات کلی: 

گروه: اکسل طراحی

فایل اکسل طراحی براکت بتنی بر اساس آیین نامه IBC 2018 - ACI 318,19 و CBC 01 - ACI 318,95
فايل پيوست

 براکت های بتنی عناصر کنسولی هستند که در ستون ها جهت ایجاد اتصال تیرها پیش بینی می شوند. فایل پیش رو اکسل طراحی براکت بتنی می باشد که بر اساس آیین ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 79500 تومان
 مشخصات کلی: 

گروه: اکسل طراحی

فایل اکسل تحلیل اتصال برشی دارای خروج از مرکزیت برای گروه پیچ
فايل پيوست

 این برنامه ظرفیت برشی اتصال پیچ و مهره ای دارای خروج از مرکزیت برای گروه پیچ را محاسبه می کند، ابزاری مناسب برای طراحی صفحات gusset و اتصالات پیچ و ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 79500 تومان
 مشخصات کلی: 

گروه: اکسل طراحی

فایل اکسل طراحی روسازی آسفالتی بر مبنای آیین نامه آشتو و استفاده از آزمایش ظرفیت باربری کالیفرنیا
فايل پيوست

 فایل پیش رو اکسل طراحی روسازی آسفالتی بر مبنای آیین نامه آشتو می باشد که با استفاده از نتایج آزمایش ظرفیت باربری کالیفرنیا CBR اطلاعات ورودی را تحلیل و نتایج را ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 79500 تومان
 مشخصات کلی: 

گروه: اکسل طراحی

طراحی ابعاد و سازه شالوده های عمیق (شمع ها و پایه های عمیق) در خشکی
فايل پيوست

 مجموعه دستورالعمل های ارائه شده در دیتاسرا شامل ضوابط و مراحل تحلیل و طراحی سازه های گوناگون صنعتی و بر اساس الزامات مندرج در آیین نامه های معتبر داخلی و ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 119500 تومان

تحلیل غیرخطی و مدل سازی عددی تیر بتن مسلح تقویت شده با FRP توسط Finite Element Method
فايل پيوست

 "پایان نامه مهندسی عمران مقطع کارشناسی ارشد - گرایش سازه" تحلیل غیرخطی و مدل سازی عددی تیر بتن مسلح تقویت شده با FRP توسط Finite Element Method   مشخصات کلی: شامل فایلهای word و ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 129500 تومان
 مشخصات کلی: 

گروه: اکسل طراحی

بررسی پارامترهای هندسی مهاربند زانویی
فايل پيوست

 "پروژه دانشجویی مهندسی عمران" بررسی پارامترهای هندسی مهاربند زانویی   مشخصات کلی: شامل فایلهای word و pdf بالغ بر 146 صفحه (4 فصل) فهرست مطالب فصل اول 1-1- مقدمه 1-2- شکل پذیری سازه ها 1-3- مفصل و لنگر پلاستیک 1-4- منحنی ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 129500 تومان
 مشخصات کلی: 

گروه: اکسل طراحی

شناسایی و رتبه بندی دلایل انحراف از هزینه پیش بینی شده و ارائه راهکارهای کاهش آن: مطالعه موردی پروژه های "پتروشیمی الف"
فايل پيوست

  "پایان نامه مهندسی عمران مقطع کارشناسی ارشد - گرایش مهندسی و مدیریت ساخت"   شناسایی و رتبه بندی دلایل انحراف از هزینه پیش بینی شده و ارائه راهکارهای کاهش آن: مطالعه ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 259500 تومان
 مشخصات کلی: 

گروه: اکسل طراحی

دستورالعمل طراحی و محاسبه سیستم روشنایی
فايل پيوست

 مجموعه دستورالعمل های ارائه شده در دیتاسرا شامل ضوابط و مراحل تحلیل و طراحی سازه های گوناگون صنعتی و بر اساس الزامات مندرج در آیین نامه های معتبر داخلی و ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 119500 تومان

تحلیل و طراحی سیستم گرمایشی ساختمان مسکونی با استفاده از ذخیره کننده های حرارتی PCM
فايل پيوست

 "پایان نامه مهندسی مکانیک مقطع کارشناسی ارشد - گرایش تبدیل انرژی" تحلیل و طراحی سیستم گرمایشی ساختمان مسکونی با استفاده از ذخیره­ کننده ­های حرارتی PCM   تهیه شده بصورت کاملا انحصاری توسط ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 449000 تومان

مکانیک شکست (Fracture Mechanics)
فايل پيوست

مقدمه : یکی از عمده ‌ترین مسائلی که انسان از زمان ساختن ساده‌ترین ابزارها با آن مواجه بوده است پدیده شکست در اجسام می‌باشد و درواقع برای استفاده از مواد ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 99500 تومان

تقویت کننده ی شبه تفاضلی کلاس-AB برمبنای اینورتر CMOS برای کاربردهای HF
فايل پيوست

 Abstract This paper presents a CMOS inverter-based c1ass-AB pseudo differential amplifier for HF applications using new sim pIe rail-to-rail CMFB circuit. The proposed circuit em ploys two CMOS inverters and the ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 119500 تومان

روش جاروب رو به عقب، برای حل پخش بار در شبکه های توزیع
فايل پيوست

 Abstract A methodology for the analysis of radial or weakly meshed distribution systems supplying voltage dependent loads is here developed. The solution process is iterative and, at each step, loads are ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 119500 تومان

بازسازی سه بعدی و تشخیص چهره با استفاده از ICA مبتنی بر هسته و شبکه های عصبی
فايل پيوست

 Abstract Kernel-based nonlinear characteristic extraction and classification algorithms are popular new research directions in machine learning. In this paper, we propose an improved photometric stereo scheme based on improved kernel-independent component ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 129500 تومان

جمع کننده کامل 1 بیتی زیر آستانه ای در فناوری تراشه هاى نیمه هادى اکسید فلزى تکمیلى65 نانومتری
فايل پيوست

 Abstract In this paper a new full adder (FA) circuit optimized for ultra low power operation is proposed. The circuit is based on modified XOR gates operated in the subthreshold region ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 99500 تومان

تئوری محدودیت ها؛ ارزیابی مقایسه ای
فايل پيوست

 Abstract The worldwide economic reorganisation of the last decade has regularly been accompanied by appeals to concepts of lean manufacturing and flexible systems. These generally imply a scaling of productive and ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 99500 تومان

روابط میان رقابت، واگذاری، تغییر سیستم های مدیریت حسابداری و عملکرد: یک مدل مسیر
فايل پيوست

 Abstract This paper is concerned with an empirical investigation into the relations among competition, delegation, management accounting and control systems (MACS) change and organizational performance. It follows a standard contingency type ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 119500 تومان

تاثیر فناوری اطلاعات بر روی بازدهی شرکت حسابداری
فايل پيوست

 Abstract In recent years, information technology (IT) has played a critical role in the services provided by the public accounting industry. However, no empirical research has evaluated the impact of IT ... [ ادامه مطلب ]

پرداخت و دانلود قیمت: 119500 تومان

ناحیه کاربری

فرمت ایمیل صحیح نمی باشد. ایمیل خود را وارد نمایید.

رمز عبور خود را وارد نمایید.

مجله اینترنتی دیتاسرا
کلیه حقوق مادی و معنوی این وبسایت متعلق به گروه نرم افزاری دیتاسرا می باشد.
ایمیل:
support.datasara[AT]gmail[دات]com

Copyright © 2024